Antique-shop.com
Antiques! => Antique Questions Forum => Topic started by: mmiedema112 on October 13, 2012, 05:10:41 pm
-
I have these old chairs i would like some info on if available i got them awhile ago cant find anything about them. I think they are hand carved due to the imperfections in the wood and not 1 is exactly the same as the other. I think they are Chippendale chairs of some sorts but not sure . I am very curious as to their origin any help i very greatly appreciated, thank you. :)
-
just click on additional options...rocket science not needed.....
-
Can you take a pic of the underside of the chair so we can see the construction ?? Theyt are Chippendale style but this style was made well into the 40`s so seeing how it was made will help !!
-
These chairs look very much like their copies of Chippendale,s from China...or a similar country...
-
Could be or bad refinishing !! Way too shiny !!
-
Agree, way too shiny! If that red color is accurate, it was probably made in the Phillipines as a copy.
-
The shiny stain on the chairs is an attempt by previous owner to restore not original color.
-
Well, I,m afraid he has made a bit of a pigs arse...of doing them...and what value they did have has been diminished somewhat...This colour is all wrong...and the only thing that you may be able to do is rub them down and re-stain them to a more acceptable colour...see link, these will give you some idea as to what colour you can aim for...but on no account do you use a varnish stripper, because if these are made of dark oak, or elm or other hardwood...then if you use a chemical based stripper the wood especially oak, will turn black...and all you will be left with is an unholy mess....double zero steel wool should be used...
but not used on oak, because remaining traces of iron may react with tannins in the wood to produce blue or black iron stain. Bronze wool or stainless steel wool may be used to avoid this
-
...but on no account do you use a varnish stripper, because if these are made of dark oak, or elm or other hardwood...then if you use a chemical based stripper the wood especially oak, will turn black..
Bigwull, not if it is American White Oak.
Now one time I experienced a "darkening" of the wood with a piece of Red Oak .... but I don't remember what I was doing. I think I was starting to apply a coat of "50-50" shellac and alcohol to seal the grain of the wood.
-
I would,nt even risk it on American white oak..its all to do with the tannin in the oak....i,ve seen white oak turn...and once it does...then its just another candidate for the woodburner.... ;D..
-
Wouldn`t worry !! They are not oak from what I can see !! Would still like to see underside !! That refinishing job pretty much took half off whatever value they may have !!
-
Who said they were Oak??
-
At least half the value, and if they're from the 1940s that was probably not alot to begin with, unfortunately.
The original wood is probably mahogany or walnut.
-
I think mahogany !! Some of the older styles of varnish had a stain added and they turn that bright red color !!
-
Ronseal made a coloured varnish,...and one of them was a rich red cedar finish...which was ok with one coat, but as more coats were applied, the wood just got redder,...but whatever it is on these chairs is going to take a lot of rubbing to dull it sufficiently...in order for a more natural colour to be applied....but i am of a mind that any value that these ever had...has evaporated....which is a shame....
-
thanks for all the info guys and gals i appreciate it will update pics when i redo them just for the fun to see them nice again
-
So, can we get a pic of the underside/construction?
-
Yes Please !! Have been waiting to see underside so we can get an idea of age !! I think 40`s too but would like to make sure !!
-
I used stripper (mostly Red Devil) for years and never had any reaction to wood, especially oak. We often had to use TSP and water and a brass brush on tough pieces and the worst that happened is the stain wood come out and we would have to restain. This was when old paint was not desirable as it is today and oak was a hot commodity. Today it would not be worth the work.